Draytek Vigor 110 ADSL Ethernet Modem

About

Other ADSL Ethernet 'modems' use workarounds to get a public IP address 'through' to your secondary device/client, requiring non-standard operation and complicated dual-stage setup (modem logs in, router routes) but the Vigor 110 provides the secondary device with a real routed IP connection and the ability to fully manage the connection, making setup easy. In most cases, the Vigor 110 needs no setup or configuration - just plug it in and set up your PC or router. All login/ISP details are entered on the connected client device, not the Vigor 110. Note : You can connect only one device directly to the Vigor 110 modem.

This method also differs from using a regular ADSL router which logs in itself and then uses NAT or multiple public IP addresses to create an onward client connection for your secondary device; that is not IP Address thrifty, or introduces secondary NAT compromises. With the Vigor 110 bridge/modem, you get a true single public IP address (or multiple, if you have them) straight through to your firewall/router, which also has complete control of the ISP connection.

Features

• ADSL, ADSL2 & ADSL2+ Ethernet Modem
• Bridge (pass) a single IP address or public subnet
• Ideal Partner for DrayTek dual-WAN products
• Ethernet Connection for client device (router, PC etc.)
• ADSL Parameters pre-set for UK parameters (adjustable) Normally no setup/configuration of the Vigor 110 required Annex A & Annex M (ADSL2+) Support
• Wall Mountable